AEG L88489FL, Руководство пользователя

Страница: 11 / 36

EXTRA RINSE BUTTON 7
Press button 7 to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
THE STAIN-PREWASH
BUTTON
8
Press button
8
to add the stain and/or
a prewash phase to a programme.
Press the button again and again to ac-
tivate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with
hard stains to remove.
When you set this function, put the
stain remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this func-
tion when you have laundry with a
high level of soil.
The set of this function increa-
ses the programme duration.
SPIN BUTTON 9
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
TEMPERATURE BUTTON 10
Press button 10 to change the default
temperature. When the display shows
- - , the appliance does not heat the
water.
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To
deactivate/activate the acoustic
signals, press button 3 and button 4
at the same time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
only when you press the buttons
and when a malfunction occurs.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, press button
1
and button
2
at the same time
until the display shows the symbol
.
• To deactivate the function, press but-
ton 1 and button 2 at the same
time until the symbol goes off.
You can activate the function:
• Before you press the Start/Pause but-
ton 4 : the appliance cannot start.
• After you press the Start/Pause but-
ton 4 , all the buttons and the pro-
gramme knob are deactivated.
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the ex-
tra rinse function permanently on when
you set a new programme.
• To
activate the function press button
5 and button 6 at the same time
ENGLISH 11