AEG L82470BI, Руководство пользователя, Страница: 8 / 36

A
Temperature value and COLD indicator.
B
Spin Speed value, RINSE HOLD , NIGHT CYCLE - indicators.
C
Programme progress display: PREWASH , MAIN WASH , RINSE ,
SPIN , DRAIN , OVERDOSAGE .
• The programme progress display shows the different phases of the selected
programme.
• During washing, a black line blinks under the running phase indicator. At the
end of each phase, the line stops blinking and remains on
If the indicator comes on, it indicates that too much deter-
gent has been used.
D
CHILD SAFETY LOCK - indicator.
E
DELAY START - indicator.
F The display shows the following information:
•
Duration of the selected programme
– After setting a programme, the duration is displayed in hours and mi-
nutes (for example ).
– After the programme has started, the remaining time is updated every
minute.
• Delay start
– When setting a delay start, the display shows the delay time (20 hours
max.) for about 3 seconds (for example ), and then it shows again
the programme duration.
– The delay time value decreases by one unit every hour and then, one
hour before the end of the programme, the time decreases every mi-
nute.
• Incorrect option setting
– In case of wrong setting the display shows the message Err and the yel-
low light of Start/Pause button starts blinking.
• Alarm codes
– If an operating problems occur, the display can show some alarm codes,
for example (see chapter «Troubleshooting»).
• End of the programme
– At the end of the programme the display shows blinking zero , the in-
dicator disappears and the door can be opened.
G
TIME SAVING - option indicator.
www.aeg.com 8