background image

CAUTION!

Risk of burns! Make sure

that the water temperature

is not too high and the

laundry is not hot. If

necessary, wait until they

cool down.

CAUTION!

Risk of injury! Make sure

that the drum is not

rotating. If necessary, wait

until the drum stops

rotating.

Make sure that the water

level inside the drum is

not too high. If necessary,

proceed with an

emergency drain (refer to

«Emergency drain» in

«Care and cleaning»

chapter).

To open the door, proceed as follows:

1. Press the On/Off button to switch the

appliance off.

2. Disconnect the mains plug from the

mains socket.

3. Open the filter flap.

4. Pull the emergency unlock trigger

downward once. Pull it downward

once again, keep it tensed and, in the

meanwhile, open the appliance door.

5. Take out the laundry and then close

the appliance door.

6. Close the filter flap.

16. CONSUMPTION VALUES

16.1 Introduction

See the web link www.theenergylabel.eu for

detailed information about Energy Label.

The QR code on the energy label supplied with the

appliance provides a web link to the product

information sheet. Keep the energy label for

reference together with the user manual and all

other documents provided with this appliance.

16.2 Legend

kg

Laundry load.

h:mm

Programme duration.

kWh

Energy consumption.

°C

Temperature in the laundry.

Litres

Water consumption.

rpm

Spin speed.

%

Remaining moisture at the end of spinning phase. The higher is the spin speed,

the higher is the noise and the lower is the remaining moisture.

ENGLISH

41

Содержание L7FEC946U













































Отзывы: