AEG L7FBE49BSA Скачать руководство пользователя страница 54

Страница: 54 / 60

Problem

Possible solution

The washing results

are not satisfactory.

• Increase the detergent quantity or use a different detergent.

• Use special products to remove the stubborn stains before

you wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

• When using AutoDose tanks, make sure that they are not

empty.

• When using AutoDose tanks, verify the pre-set detergent/

fabric softener dosage. Refer to "Basic setting" paragraph in

"The AutoDose Technology" chapter.

• Make sure that you have cleaned the AutoDose tanks before

using different brand and type of detergent, fabric softener or

other additives.

Too much foam in the

drum during the wash‐

ing cycle.

• Reduce the quantity of detergent.

• When using AutoDose tanks, verify the pre-set detergent/

fabric softener dosage. Refer to "Basic setting" paragraph in

"The AutoDose Technology" chapter.

The detergent/fabric

softener level does not

decrease in the Auto‐

Dose tanks after wash‐

ing.

• This is normal: tanks are quite large and detergent consump‐

tion may be not so evident.

After the check, activate the appliance. The programme continues

from the point of interruption.

If the problem occurs again, contact the Authorised Service Centre.

The necessary data for the service centre are on the rating plate.

15.2 Emergency door

opening

In case of power failure or functioning

failure the appliance door remains

locked. The washing programme

continues when the power is restored. If

the door remains locked in case of

failure, it is possible to open it using the

emergency unlock function.
Before opening the door:

CAUTION!

Risk of burns! Make sure

that the water temperature

is not too high and the

laundry is not hot. If

necessary, wait until they

cool down.

CAUTION!

Risk of injury! Make sure

that the drum is not

rotating. If necessary, wait

until the drum stops

rotating.

Make sure that the water

level inside the drum is

not too high. If necessary,

proceed with an

emergency drain (refer to

«Emergency drain» in

«Care and cleaning»

chapter).

To open the door, proceed as follows:

1. Press the On/Off button to switch

the appliance off.

2. Disconnect the mains plug from the

mains socket.

www.aeg.com

Содержание L7FBE49BSA





























































Результаты поиска

Содержание L7FBE49BSA

Отзывы:

Похожие инструкции для L7FBE49BSA

Бренды по названию

Популярные бренды

AEG L7FBE49BSA, Руководство пользователя

Результаты поиска

Содержание L7FBE49BSA

Отзывы:

Похожие инструкции для L7FBE49BSA

Бренды по названию

Популярные бренды