13.8
Cancelling the delay start
To cancel the delay start:
1.
Press button Start/Pause to set the
appliance to pause.
The related indicator flashes.
2.
Press button Zeitvorwahl repeatedly
until the display shows .
3.
Press button Start/Pause again to
start the programme immediately.
13.9
Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1.
Press button Start/Pause.
The related indicator flashes.
2.
Change the function set.
3.
Press the button Start/Pause again.
The programme continues.
13.10
Cancelling a programme
1.
Press button Ein/Aus to cancel the
programme and to deactivate the
appliance.
2.
Press button Ein/Aus again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
drains the water. Make sure
that the detergent is still in
the detergent compartment,
if not fill the detergent
again.
13.11
Opening the door
If the temperature and level
of the water in the drum are
too high and the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1.
Press button Start/Pause.
In the display the related door lock
indicator goes off.
2.
Open the appliance door.
3.
Close the door and press button
Start/Pause.
The programme or the delay start
continues.
13.12
End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display comes on and the door
locked indicator
goes off.
The indicator of Start/Pause button goes
off.
1.
Press button Ein/Aus to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2.
Remove the laundry from the
appliance.
3.
Make sure that the drum is empty.
4.
Keep the door ajar, to prevent
mildew and odours
5.
Close the water tap.
13.13
Draining water out after
end of cycle
The washing programme is completed,
but there is water in the drum
:
The drum turns regularly to prevent the
creases in the laundry.
The door lock indicator
is on. The
door stays locked.
You must drain the water to open the
door:
1.
If necessary, decrease the spin
speed.
2.
Press the Start/Pause button.
ENGLISH
19
Содержание L75670WD
