AEG L6TBG64, Руководство пользователя

Страница: 24 / 40

11.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press button Start/Pauze - Départ/
Pause.
The related indicator flashes.
2. Change the option set.
3. Press the button Start/Pauze -
Départ/Pause again.
The programme continues.
11.11 Cancelling a running
programme
1. Press button Aan/Uit - Marche/Arrêt
to cancel the programme and to
deactivate the appliance.
2. Press button Aan/Uit - Marche/Arrêt
again to activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
11.12 The ProSense System
load detection
After touching the Start/Pauze - Départ/
Pause button:
1. The ProSense System starts the
laundry load detection to calculate
the real programme duration. The
indicator and the time dots flash.
2. After about 15 minutes the display
shows the new programme duration:
the indicator goes off and the time
dots stops flashing.
The appliance adjusts automatically
the programme duration to the load
to achieve perfect washing results in
the minimum possible time. The
programme duration could increase
or decrease.
The ProSense System
detection is carried out with
complete washing
programmes only (no
skipping phase selected).
The ProSense System is not
available with all
programmes such as :Wol/
Zijde - Laine/Soie, Spoelen -
Rinçage, Centrif. -
EssoragePompen - Vidange,
and programmes with short
cycles.
11.13 Opening the Lid when
the programme operates
CAUTION!
If the temperature and level
of the water in the drum are
too high, the lid lock
indicator
stays on and
you cannot open the lid.
To open the lid proceed as follows:
1. Press the button Aan/Uit - Marche/
Arrêt for some seconds to
deactivate the appliance.
2. Wait for some minutes and then open
carefully the lid.
3. Close the lid.
4. Activate the appliance and set the
programme again.
11.14 Opening the Lid when
the delay start is active
While the delay start operates, the
appliance lid is locked.
To open the appliance lid:
1. Press button Start/Pauze - Départ/
Pause .
The lid lock indicator goes off.
2. Open the appliance lid.
3. Close the lid and press button Start/
Pauze - Départ/Pause .
The delay start continues.
www.aeg.com 24