AEG L61271WDBI Скачать руководство пользователя страница 27

Страница: 27 / 40

Problem

Possible solution

The appliance does not
fill with water properly.

• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authority.

• Make sure that the water tap is not clogged.
• Make sure that the filter of the inlet hose and the filter of

the valve are not clogged. Refer to “Care and cleaning”.

• Make sure that the inlet hose has no kinks or bends.
• Make sure that the connection of the water inlet hose is

correct.

The appliance does not
drain the water.

• Make sure that the sink spigot is not clogged.
• Make sure that the drain hose has no kinks or bends.
• Make sure that the drain filter is not clogged. Clean the fil-

ter, if necessary. Refer to 'Care and cleaning'.

• Make sure that the drain hose is in the correct position. The

hose may be too low.

• Set the drain programme if you set a programme without

drain phase.

• Set the drain programme if you set an option which ends

with water in the tub.

The spin phase does not
operate or the washing
cycle lasts longer than
usually.

• Set the spin programme.
• Adjust manually the items in the tub and start the spin

phase again. This problem may be caused by balance prob-
lems.

There is water on the
floor.

• Make sure that the couplings of the water hoses are tight

and there is not water leakages.

• Make sure that the drain hose have no damages.
• Make sure you use the correct detergent and the correct

quantity of it.

• Make sure you have replaced the emergency emptying cap

into the filter

• Make sure you have properly screwed the filter in after

cleaning.

You cannot open the ap-
pliance door.

• Make sure that the washing programme is finished.
• Set the drain or the spin programme if there is water in the

drum.

The appliance makes an
unusual noise.

• Make sure the levelling of the appliance is correct. Refer to

'Installation'.

• Make sure that the packaging and/or the transit bolts are

removed. Refer to 'Installation'.

• Add more laundry in the drum. The load may be too small.

ENGLISH

Содержание L61271WDBI









































Результаты поиска

Содержание L61271WDBI

Отзывы:

Бренды по названию

Популярные бренды

AEG L61271WDBI, Руководство пользователя

Результаты поиска

Содержание L61271WDBI

Отзывы:

Бренды по названию

Популярные бренды