background image

 

 

 

Set the delay before you press the button 8. 

You can delay the wash programme from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum 

of 20 hours. 

Adding items after you have set the delay (throughout the delay time the door will be locked): 

 

Press the button 8 to put the machine in pause 

 

Add the laundry, close the door. 

 

Press the button 8 again. 

Setting the delayed start: 

 

Set the programme and the required options. 

 

Set the delay start. 

 

Press the button 8: the appliance starts its hourly countdown. 

 

The programme will start after the selected delay has expired 

Cancelling the delayed start: 

 

Press the button 8 to set the washing machine to PAUSE; 

 

Press the button 9 once until the display shows the symbol   

 

Press the button 8 again to start the programme. 

Interrupting a programme 

Press button 8 to interrupt a programme which is running  

Cancelling a programme 

Turn the selector dial to Off  

Opening the door  

When the machine is working the door is locked. 

To open the door, press button 8 to set the machine to pause 

If the light C after a few minutes goes off, the door can be opened. 

If the light C stays on, this means the door cannot be opened in the current setting. 

If this is the case, turn the programme dial to   which turns the machine off. After a few minutes, the door can be 

opened. 

At the end of a programme 

The machine stops automatically. The pilot lights A and C go off. A blinking   will appear on the display. 

If you have set a programme or an option that ends with water in the tub, the light C remains lit. The door is locked. 

The water must be emptied out before opening the door. The drum will continue to turn at regular intervals until 

waster is drained. 

To empty the water:  

 

Turn the programme selector dial to  

Содержание L61271 WDB1







Отзывы: