AEG L 98699 FL, Руководство пользователя

Страница: 20 / 40

5. Measure out the detergent and the
fabric conditioner.
6.
Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.
9.4 Set the delay start
1.
Touch button 7 again and again to
set the desired delayed start. The
display shows the expected end of
the programme
2.
Touch button 6 , the appliance
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you touch button
6
to
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the
Steam programme.
9.5 Starting the programme
1.
Touch button 6 to start the pro-
gramme. The indicator of button 6
stops to flash and is on with red col-
our.
If a delayed start is set, the appliance
starts the countdown.
The appliance adjust auto-
matically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximate-
ly 15 minutes from the start of
the programme, the display
shows the new time value.
9.6 Interrupt a programme
1.
Touch button 6 . The indicator
flashes.
2.
Touch button
6
again. The wash-
ing programme continues.
9.7 Cancel a programme
1.
Press button 1 to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Press button
1
again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
9.8 Change a function
You can change only some functions be-
fore they operate.
1.
Touch button
6
. The indicator
flashes.
2. Change the function set.
3.
Touch button 6 again. The wash-
ing programme continues.
9.9 Open the door
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1.
Touch button 6 . The door lock
symbol in the display goes off and a
message tells you that the door is
unlocked.
2. Open the appliance door.
3. Close the appliance door and touch
button
6 again. The programme or
the delay start continues.
If the temperature and the level
of the water is too high, the door
lock symbol stays on. You cannot
open the door. If necessary, do
the following procedure to open
the door:
1.
Deactivate the appliance.
2.
Wait for some minutes.
3. Make sure that no water is in
the drum.
20 www.aeg.com