background image

2.

Press button 

4

 , the appliance starts

the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.

Before you press button 

4

 to

start the appliance, you can cancel
or change the set of the delay
start.
You cannot set the delay start with
the 

Steam

 programme.

CANCEL THE DELAY START

1.

Press button 

4

 . The related indica-

tor flashes.

2.

Press button 

5

 again and again until

the display shows 

0’

.

3.

Press button 

4

 . The programme

starts.

OPEN THE LID

While a programme or the delay start op-
erates, the lid is locked.

To open the lid:

1.

Press button 

4

 . You can open the

lid 2 minutes after the appliance
stops. The door lock symbol in the
display goes off.

2.

Open the lid.

3.

Close the lid and press button 

4

 .

The programme or the delay start
continues.

If the temperature and level of the
water in the drum are too high,
the door lock symbol stays on and
you cannot open the lid . If neces-
sary, do the following procedure
to open the lid.

1.

Deactivate the appliance.

2.

Wait for some minutes.

3.

Make sure that there is no wa-
ter in the drum.

If you deactivate the appliance, it
is necessary to set the programme
again.

AT THE END OF PROGRAMME

• The appliance stops automatically.
• The acoustic signals operate.
• In the display 

 comes on.

• The indicator of the Start/Pause button

4

 goes off.

• You can open the lid 2 minutes after

the appliance stops. The door lock sym-
bol goes off.

• Press button 

1

 to deactivate the ap-

pliance. After five minutes from the end
of the programme, the AUTO OFF
function automatically deactivates the
appliance.

When you activate the appliance
again, the display shows the end
of the last set programme. Turn
the programme knob to set a new
cycle.

• Remove the laundry from the appli-

ance. Make sure that the drum is emp-
ty.

• Keep the door ajar, to prevent mildew

and odours.

• Close the water tap.

The washing programme is completed,
but the 'Rinse Hold' function is on:

– The drum turns regularly to prevent the

creases in the laundry.

– The door stays locked.
– You must drain the water to open the

door.

To drain the water:

1.

If necessary, decrease the spin speed.

2.

Press the Start/Pause button 

4

 . The

appliance drains the water and spins.

3.

When the programme is completed
and the door lock symbol goes off,
you can open the door

4.

Deactivate the appliance.

The appliance drains and spins
automatically after approximately
18 hours.

ENGLISH

15

Содержание L 70260 TL

































Отзывы: