AEG IKE96654XB, Руководство пользователя

Страница: 12 / 24

To deactivate the function: touch . The
indicators and light up. Use or
to set
on the display.
The function has no effect on the
operation of any cooking zone.
5.8 Bridge
This function connects two cooking zones
and they operate as one. You can use the
function with large cookware.
1. Place the cookware on two cooking
zones. The cookware must cover the
centres of both zones.
turns white.
2. Touch to activate the function.
3. Set the heat setting.
The cookware must cover the centres of both
zones but not go beyond the area marking.
To deactivate the function, touch . The
cooking zones operate independently.
5.9 PowerSlide
This function allows you to adjust the
temperature by moving the cookware to a
different position on the induction cooking
area.
The function divides the induction cooking
area into three areas with different heat
settings. The hob detects the position of the
cookware and adjust the heat setting
corresponding with the position.
Use only one pot when you
operate the function.
If you want to change the heat
setting, lift up the cookware and
place it on a different zone.
Sliding the cookware can cause
scratches and discolouration of
the surface.
• The zone indicator shows both zones in a
bridge even if only one of the zones is
used.
• You may adjust the heat setting manually
only if at least one of the zones is
activated automatically.
• You can change the heat settings for each
position separately. When you deactivate
the hob, it remembers your heat settings
and applies it next time you activate the
function.
• If you want to change the heat setting, lift
up the cookware and place it on a
different zone. Sliding the cookware can
cause scratches and discolouration of the
surface.
Touch to activate the function.
The symbol turns red and the control bar
displays the default heat setting. All cooking
zones operate for 9 minutes.
After 9 minutes, an acoustic signal sounds
and the empty cooking zones are
deactivated. Touch to resume this
function. You can move the pot or place it in
a new position.
To modify the default heat setting manually
touch the control bar and choose the
appropriate level.
• You may change the default heat setting
only if the function is active.
• You can change the default heat settings
for each position separately. When you
deactivate the hob, it remembers your
settings and applies them the next time
you activate the function.
To deactivate the function, touch . The
symbol turns white.
12 ENGLISH