AEG HSM/R 5596, Инструкция по эксплуатации

Страница: 42 / 74

English
42
Accessories (Fig. A)
1 Clipper head
1 Hair clipper
1 Charging station/stand
1 Cutting length comb
1 Power adapter
1 Cleaning brush
Table: Cutting step versus cutting length
Cutting step Cutting length
1= approx. 3.0 mm
3= approx. 6.0 mm
5= approx. 10.0 mm
7= approx. 13.0 mm
9= approx. 16.0 mm
Charging the Unit
Turn the unit off. 0 can be seen on the switch (6).
Connect the power adaptor connector with one of the following jacks.
The socket directly at the bottom end of the unit (5).
Alternatively place the unit in the charging station. The socket is at the rear.
Plug the power adaptor into a 230 V/50 Hz wall outlet.
The indicator light remains red during the charging process.
NOTE:
The charge indicator does not indicate the state of charge of the rechargeable battery.
Charge the unit before rst use for 10 hours.
NOTE:
After initial use, do not charge the battery for longer than 8 hours at one time.
If the battery is empty, the appliance can be operated from the mains. To do so, con
-
nect the adapter directly to the clipper.
CAUTION:
After 8 hours always disconnect from mains power supply.