AEG HK884400I-G, Руководство пользователя

Страница: 5 / 20

You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
Sticking the seal to the rabbet
• Clean the rabbet in the work surface.
• Bond the supplied sealing tape onto the upper surface of the rabbet along the edges of
the cut-out section.
• Cut the sealing tape into four pieces relating to the length of the edges of the rabbet.
• For the four corners of the rabbet the ends of the sealing tapes must be cut into mitres.
Do not bond the ends over one another.
• Bond the sealing tape flush into the corner of the rabbet, so that no silicon compound
can get under the glass ceramic when grouting.
• Do not extend the tapes.
Assembly
min. 500 mm
min.
50 mm
min.
50 mm
min.
5 mm
774
+1mm
514
+1mm
490
+1mm
min. 600
mm
750
+1mm
R10
mm
R5
mm
12
mm
7
mm
min.
25mm
min. 5mm
min. 20mm
Installation instructions 5