1
Burner cap and crown
2
Thermocouple
3
Ignition candle
1
2
3
4
1
Burner cap
2
Burner crown
3
Ignition candle
4
Thermocouple
WARNING!
If the burner does not light after 15 seconds, release the control knob, turn it into off posi
-
tion and try to light the burner again after minimum 1 minute.
In the absence of electricity you can ignite the burner without electrical device; in this case
approach the burner with a flame, push the relevant knob down and turn it counter-clock
-
wise to maximum gas release position.
If the burner accidentally goes out, turn the control knob to the off position and try to light
the burner again after minimum 1 minute.
The spark generator can start automatically when you switch on the mains, after installa
-
tion or a power cut. It is normal.
Turning the burner off
To put the flame out, turn the knob to the symbol .
WARNING!
Always turn the flame down or switch it off before you remove the pans of the burner.
HELPFUL HINTS AND TIPS
Energy savings
• If possible, always put the lids on the pans.
30
Helpful hints and tips
