9
ENGLISH
1.4
Respecting this indications, will
mantain the warranty rights,
ensures the declared properties
of the products and warrant the
complete reliability.
OK
!
OK!
NO!
2 x Ø
ã
Before assembling the
hose, please check the
appropriate crimping
of both sides of the
hoses.
ã
Don’t tighten by tools.
ã
Hand-tighten O-ring
seal connectors until
feeling a mechanical
rest.
ã
Don’t set the hose in
the wall.
ã
Tighten the hose
without any twis or
tension.
ã
Prolonged contact wit
any substance, even
scarcely aggressive, can
cause external braid
damage and subsquent
flexible burst.
NO!
ã
Before bending the
hose please consider a
straight part of 2 times
the external diameter.
ã
Mantain minimum bend
radius (DN= nominal
internal diameter):
DN
= 2
mm
DN8 =
0mm
DN10 =
mm
DN1
=
mm
ã
Hand-tighten
connectors with gasket
seal (nuts) then apply
1/
turn using an
appropriate wrench.
ã
Do not expose the
hose to lateral stress
nor overtight by any
tool (ex. during the
installation of the
faucet stud or the drain
pop-up lever).
