AEG GS45AVB, Руководство пользователя, Страница: 60 / 72

Programme Degree of soil
Type of load Programme pha-
ses Consumption values
1)
Duration
(min) Energy
(kWh) Water
(l)
3)
Heavy soil
Crockery, cut-
lery, pots and
pans • Prewash
• Wash 70 °C
• Rinses
• Dry 130 - 140 1.9 - 2.1 18 - 20
4)
Fresh soil
Crockery and
cutlery • Wash 60 °C
• Rinse 30 0.8 9
5)
All • Prewash 12 0.1 5
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2)
With this programme you have the most efficient use of water and energy consumption for crockery
and cutlery with normal soil. (This is the standard programme for test institutes).
3)
This programme has a high temperature rinsing phase for better hygiene results. During the rinsing
phase, the temperature stays at 70 ° for at least 10 minutes.
4)
With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5)
Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the
dishes and bad odours to come out from the appliance. Do not use detergent with this programme.
5.1
Information for test
institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
6.
SETTINGS
6.1
Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
• The activation or the deactivation of
the acoustic signal for end of
programme.
These settings will be saved until you
change them again.
How to set the programme
selection mode
The appliance is in programme selection
mode when all the programme indicators
are on.
When you activate the appliance, usually
it is in programme selection mode.
However, if this does not happen, you
can set the programme selection mode
in the following way:
Press and hold the programme button
until the appliance is in programme
selection mode.
www.aeg.com 60