AEG GM18EX2, Оригинальное руководство пользователя

Страница: 14 / 16

14
14
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
L1860R-X5
L1890R
AL18G
AL1218G
BL1218
BLK1218
BL18DP-X5
BL18DP2-X5
Use AEG 18V battery and charger only
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
BLOWER SAFETY WARNINGS
Failure to keep loose clothing or long hair from being drawn into air intake could
result in personal injury.
Ensure you have proper footing, especially in case of slanted surfaces.
The blower shall not be used as a vacuum device.
Do not blow hot, flammable or explosive material.
Never allow children, persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge or people unfamiliar with these
instructions to use the machine. Local regulations may restrict the age of the
operator.
The operator or user is responsible for accidents or hazards occurring to other
people or their property.
Never operate the machine while people, especially children or pets, are nearby.
Use the machine only in daylight or good artificial light.
If the product is dropped, suffers heavy impact or begins to vibrate abnormally,
immediately stop the product and inspect for damage or identify the cause
of the vibration. Any damage should be properly repaired or replaced by an
authorised service centre.
Do not touch moving hazardous parts before the product is disconnected from
the battery pack and the moving hazardous parts have come to a complete stop.
Repairs should only be carried out by an authorised service centre.
Do not operate the product with defective guard or enclosure or shields.
Wear protective goggles while operating.
To prevent dust irritation the wearing of a face mask is recommended.
Do not operate the machine when barefoot or wearing open sandals, always
wear substantial footwear and long trousers.
Failure to keep loose clothing from being drawn into air intake could result in
personal injury.
Failure to keep long hair away from the air inlet could result in personal injury.
Always be sure of your footing on slopes.
Never blow debris in the direction of bystanders. Do not operate without tubes
in place.
Do not overreach and keep your balance at all times.
Walk, never run.
Keep all cooling air inlets clear of dirt.
Do not modify this blower. Unauthorized modifications may impair the safety of
TECHNICAL DATA CORDLESS BLOWER GM18EX2
Rated voltage 18 V
No-load speed
level 1
level 2
level 3 18700 min -1
13300 min
-1
11500 min -1
Air speed max.
level 1
level 2
level 3 200 km/h
155 km/h
112 km/h
Air flow rate
level 1
level 2
level 3 2.9 m 3 /min
2.2 m
3
/min
1.8 m 3 /min
Rated current 16 A
Weight - not including battery pack 1.15 kg
Measured values determined according to EN 50636-2-100 Annex CC.
A-weighted sound pressure level (at operators ear) L
p
A
= 84 dB(A)
Uncertainty K 2.5 dB(A)
A-weighted sound power level L
WA
+ K
WA
= 94.5 dB(A)
Uncertainty K 1.74 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 50636-2-100 Annex BB:
Handle Vibration a
h
= 3.4 m/s 2
Uncertainty K 1.5 m/s 2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 50636-2-100 Annex BB and may
be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent applications, with diff erent accessories or
poorly maintained, the vibration emission may diff er. This may signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing
the job. This may signifi cantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the eff ects of
vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.