manualshive.com logo in svg

AEG FSK94847P, Руководство пользователя, Страница: 26 / 32

Поделиться
Скачать
AEG FSK94847P Скачать руководство пользователя страница 26

Problem and alarm code

Possible cause and solution

The appliance does not

drain the water.
The display shows 

, Er‐

ror i20 and Water is not

draining.

• Make sure that the sink spigot is not clogged.

• Make sure that the interior filter system is not clogged.

• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.
The display shows 

, Er‐

ror i30 and Risk of flood

detected.

• Close the water tap and contact an Authorised Service

Centre.

Malfunction of the water lev‐

el detection sensor.

The display shows i41 - i44.

• Make sure that the filters are clean.

• Switch the appliance off and on.

Malfunction of the wash

pump or the drain pump.

The display shows i51 - i59

or i5A - i5F.

• Switch the appliance off and on.

The temperature of the wa‐

ter inside the appliance is

too high or malfunction of

the temperature sensor oc‐

curred.

The display shows i61 or 

i69.

• Make sure that the temperature of the inlet water does

not exceed 60°C.

• Switch the appliance off and on.

Technical malfunction of the

appliance.

The display shows iC0 or 

iC3.

• Switch the appliance off and on.

The level of water inside the

appliance is too high.

The display shows iF1.

• Switch the appliance off and on.

• Make sure that the filters are clean.

• Make sure that the outlet hose is installed at the right

height above the floor. Refer to the installation instruc‐

tions.

The appliance stops and

starts more times during op‐

eration.

• It is normal. It provides optimal cleaning results and en‐

ergy savings.

The programme lasts too

long.

• If the delay start option is set, cancel the delay setting or

wait for the end of the countdown.

• Activating options often increases the programme dura‐

tion.

The displayed programme

duration is different than the

duration in the consumption

values table.

• The pressure and the temperature of the water, the var‐

iations of the mains supply, the options, the quantity of

dishes and the degree of soil can change the pro‐

gramme duration.

www.aeg.com

26

Содержание FSK94847P

































Отзывы:

Нет отзывов