background image

Indicator

Description

Drying phase indicator. It is on when you select a programme with the dry‐

ing phase. It flashes when the drying phase operates. Refer to "Pro‐

gramme selection".

Delay Start indicator. It is on when you set the delay start. Refer to "Daily

use".

Pause indicator. It flashes when you pause a wash cycle or the delay

countdown by opening the appliance door. Refer to "Daily use".

   

Alert indicators. They are on when a malfunction of the appliance occurs.

Refer to "Troubleshooting".

5. PROGRAMME SELECTION

5.1 MY TIME

Using MY TIME selection bar, you can

select a suitable wash cycle based on

programme duration, ranging from 30

minutes to four hours.

C

A

B

D

E

A. Quick is the shortest programme

(30min) suitable for washing a load

with fresh and light soil.

B. 1h is a programme suitable for

washing a load with fresh and lightly

dried-on soil.

C. 1h 30min is a programme suitable

for washing and drying normally

soiled items.

D. 2h 40min is a programme suitable

for washing and drying heavily soiled

items.

E. ECO is the longest programme (4h)

offering the most efficient use of

energy and water consumption for

crockery and cutlery with normal soil.

This is the standard programme for

test institutes. 

1)

5.2 EXTRAS

You can adjust the programme selection

to your needs by activating EXTRAS.

ExtraSilent

 ExtraSilent allows to reduce the noise

generated by the appliance. When the

option is activated, the wash pump works

quietly at a lower speed. Due to the low

speed, the programme duration is longer.

ExtraPower

 ExtraPower improves the washing

results of the selected programme. The

option increases the wash temperature

and duration.

GlassCare

 GlassCare provides special care for a

delicate load. The option prevents rapid

changes in the wash temperature of the

selected programme and reduces it to

45 °C. This protects glassware in

particular from damaging.

5.3 AUTO Sense

The AUTO Sense program automatically

adjusts the wash cycle to the type of

load.

1) This programme is used to assess compliance with the Ecodesign Comission Regulation (EU)
2019/2022.

www.aeg.com

8

Содержание FSK73677P

































Отзывы: