AEG FSK32610Z, Руководство пользователя

Страница: 21 / 28

Problem and alarm code Possible cause and solution
The level of water inside the appliance
is too high.
• The indicator
flashes 15 times
intermittently.
• Acoustic signal sounds 15 times in‐
termittently.
• Switch the appliance off and on.
• Make sure that the filters are clean.
• Make sure that the outlet hose is installed at
the right height above the floor. Refer to the in‐
stallation instructions.
The appliance stops and starts more
times during operation.
• It is normal. It provides optimal cleaning results
and energy savings.
The programme lasts too long. • If the delayed start option is set, cancel the de‐
lay setting or wait for the end of the count‐
down.
• Refer to the consumption values table in the
chapter "Programmes".
Small leak from the appliance door. • The appliance is not levelled. Loosen or tight‐
en the adjustable feet (if applicable).
• The appliance door is not centred on the tub.
Adjust the rear foot (if applicable).
The appliance door is difficult to close. • The appliance is not levelled. Loosen or tight‐
en the adjustable feet (if applicable).
• Parts of the tableware are protruding from the
baskets.
The appliance door opens during the
wash cycle.
• The AirDry function is activated. You can de‐
activate the function. Refer to "Settings".
Rattling/knocking sounds from inside
the appliance.
• The tableware is not properly arranged in the
baskets. Refer to basket loading leaflet.
• Make sure that the spray arms can rotate free‐
ly.
The appliance trips the circuit-beaker. • The amperage is insufficient to supply simulta‐
neously all the appliances in use. Check the
socket amperage and the capacity of the me‐
ter or turn off one of the appliances in use.
• Internal electrical fault of the appliance. Con‐
tact an Authorised Service Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
WARNING!
We do not recommend using
the appliance until the
problem has been
completely fixed. Unplug the
appliance and do not plug it
in again until you are certain
that it operates correctly.
ENGLISH 21