manualshive.com logo in svg

AEG FSB42607Z, Руководство пользователя, Страница: 21 / 28

Поделиться
Скачать
AEG FSB42607Z Скачать руководство пользователя страница 21

Problem and alarm code

Possible cause and solution

Malfunction of the water lev-
el detection sensor.
• The lights related to

MY TIME selection bar
flash 4 times intermittent-
ly.

• An acoustic signal

sounds intermittently.

• Make sure that the filters are clean.
• Switch the appliance off and on.

Malfunction of the wash
pump or the drain pump.
• The lights related to

MY TIME selection bar
flash 5 times intermittent-
ly.

• An acoustic signal

sounds intermittently.

• Switch the appliance off and on.

The temperature of the wa-
ter inside the appliance is
too high or malfunction of
the temperature sensor oc-
curred.
• The lights related to

MY TIME selection bar
flash 6 times intermittent-
ly.

• An acoustic signal

sounds intermittently.

• Make sure that the temperature of the inlet water does

not exceed 60°C.

• Switch the appliance off and on.

Technical malfunction of the
appliance.
• The lights related to

MY TIME selection bar
flash 12 times intermit-
tently.

• An acoustic signal

sounds intermittently.

• Switch the appliance off and on.

The level of water inside the
appliance is too high.
• The lights related to

MY TIME selection bar
flash 15 times intermit-
tently.

• An acoustic signal

sounds intermittently.

• Switch the appliance off and on.
• Make sure that the filters are clean.
• Make sure that the outlet hose is installed at the right

height above the floor. Refer to the installation instruc-
tions.

The appliance stops and
starts more times during op-
eration.

• It is normal. It provides optimal cleaning results and en-

ergy savings.

ENGLISH

21

Содержание FSB42607Z





























Отзывы:

Нет отзывов