12
The keys are to be touched for mini-
mum 1 sec. before activation.
Finger Touch
Cooking Zones
Zones can be set from 1-9, where 9
is the highest level.
1. Press the
k
button.
2. Press
l
or the
m
button to set
the desired zone.
Adjustment of the zones must take
less than 10 seconds, otherwise the
cooking section will turn off again.
Press the
m
button to set the zone
level by level from 0-9.
Press the
l
button to set the zone
level by level from 9-0.
If you keep pressing the
l
or
m
button, the adjustment will be quick-
er - the hob will run through the
adjustment levels 1-9 and stop when
you reach “0”.
If there is no pan on the zone or if
the pan is not magnetic, “F” will
show on the display for max. 10 sec,
after which the appliance will turn
off.
33
Mounting:
When mounting several hobs together you must use a reinforcement beam
between each hob as well as the silicone supplied with the hobs (see fig.)
1. Cut a hole of the calculated size in the table top
2. Place the individual hobs upside down on a mat. Take care that the top side is
not scratched.
3. Mount the clamping fittings in the holes in the side of the base panels (see
fig.)
4. Place the first hob in the hole.
5. Apply silicone to the two corners joining the next hob (see fig.)
Use only the silicone supplied with the hobs as this is intended to tolerate the
high temperatures of the appliance.
6. Push a reinforcement beam up against the hob. Apply silicone on the rein-
forcement beam (see fig.)
7. Tighten the clamping fittings to the table top using a screwdriver.
8. Repeat the process for the other hobs.
Silicone
Содержание FM 4803K-AN
