AEG FFB83806PM, Руководство пользователя, Страница: 24 / 28

Problem Possible cause and solution
Traces of rust on cutlery. • There is too much salt in the water used for washing.
Refer to "The water softener" .
• Silver and stainless steel cutlery were placed together.
Avoid putting silver and stainless steel items close to-
gether.
There are residues of deter-
gent in the dispenser at the
end of the programme. • The detergent tablet got stuck in the dispenser and
was not completely washed away by water.
• Water cannot wash away the detergent from the dis-
penser. Make sure that the spray arm is not blocked or
clogged.
• Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
Odours inside the appliance. • Refer to "Internal cleaning" .
Limescale deposits on the ta-
bleware, on the tub and on
the inside of the door. • The level of salt is low. Check the salt indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to
"The water softener"
.
• Use salt and set regeneration of the water softener
even when multi-functional tablets are used. Refer to
"The water softener"
.
• If lime scale deposits still remain, clean the appliance
with appliance cleaners which are particularly suitable
for this purpose.
• Try a different detergent.
• Contact the detergent manufacturer.
Dull, discoloured or chipped
tableware. • Make sure that only dishwasher-safe items are washed
in the appliance.
• Load and unload the basket carefully. Refer to basket
loading leaflet.
• Place delicate items in the upper basket.
• For washing delicate items and glassware, select the
dedicated programme. Refer to "Programmes" .
Refer to "Before first use" ,
"Daily use" or "Hints and
tips" for other possible
causes.
13. TECHNICAL INFORMATION
Dimensions Width / height / depth (mm) 596 / 850 / 610
Electrical connection
1)
Voltage (V) 200 - 240
Frequency (Hz) 50 - 60
www.aeg.com 24