AEG Favorit CE, Инструкция

Страница: 10 / 81

10
Instruction book
Water hardness
°d
1)
mmol/l
2)
Setting on the
water softener
Number of light
flashes
> 24 > 4,2
18 - 24 3,2 - 4,2
12 - 18 2,1 - 3,2
4 - 12 0,7 - 2,1
below 4 below 0,7
5
4
3*
2
1
5
4
3
2
1
no salt is needed
The dishwasher must be switched off.
1. Press the water softener and functions buttons simultaneously and
hold them pressed in, then also press in the On/Off button.
2. When the lamps for the water softener and functions buttons starts to
flash, you can let go of the buttons.
3. Press the water softener button once. At first the lamp will be solid,
then it starts to flash.
- The number of flashes are equivalent with the set water hardness level.
- This sequence of flashes is repeated several times after a few
seconds pause.
4. The water hardness level is raised by 1 step every time you press the
water softener button.
After hardness level 5 comes hardness level 1.
5. Once the hardness setting is set correctly, press the On/Off button.
If the setting 1 is chosen, the salt indicator lamp is not lit.
1) german degree of measurement for the water hardness
2) millimol, internationel unit for water hardness
*) factory setting
Prior to using for the first time
Adjusting the water softener
To prevent limescaling on the dishes and to the interior of the dishwasher,
the dishes must be washed with soft i.e. water with low lime content.
This dishwasher is equipped with a water softener, where tapwater which
is harder then 4°d (german degree) is descaled with special salt.
Adjust the water softener according to the table below for the water
hardness level for your area. Contact your local Water Authority to find
the exact water hardness level for your area.
The water softener has 5 settings:
english AEG Favorit CE 3-09-30 08.38 Sidan 10