11
•
Use the OK/START button to switch from the menu item SETTINGS…
to the Settings sub-menu.
The Settings sub-menu
Here go to the desired setting using the direction buttons (
or
). In
the info status bar your position within the sub-menu is always shown.
•
LANGUAGE
To set the language of the text line in the display; also see the section
“Resetting the language”.
•
WATER HARDNESS
To set the value for water hardness electronically (value range 1 to
10).
•
RINSE AID
When option 3 IN 1 is activated: Switch rinse-aid addition function
on or off.
When option 3 IN 1 is not activated: The rinse-aid addition function
is always switched on, even if OFF is selected for RINSE-AID.
•
SOUND VOLUME
To set the sound volume of the acoustic signals (value range 0 to 5);
at 0 the acoustic signals are switched off.
•
BRIGHTNESS
To set the brightness of the display (value range 1 to 10).
•
CONTRAST
1
To set the contrast of the display (value range 1 to 10).
Adjusting an option/setting
1.
Go to the option or setting that you wish to adjust.
2.
Press the OK/START button. The value that is currently set will flash.
3.
Using the direction buttons (
or
)
select the desired value.
4.
Press the OK/START button. The newly set value is lit without flashing.
5.
Using the direction buttons (
or
) you can select another option or
setting.
3
A selected value is accepted using the OPTION button. In the display
the first entry in either the Options or Settings menu is displayed.
3
You can abort the setting procedure using the RESET button.
1.
not available with all models