AEG FAVORIT 84470 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 48

AEG FAVORIT 84470 Скачать руководство пользователя страница 35

Operating instructions

35

...the wash results are not satisfactory

The dishes are not clean

●

The wrong washing programme has been selected.

●

The dishes were arranged in such a way as to stop water reaching all
parts of the surface. The baskets must not be overloaded.

●

The spray arms do not rotate freely due to wrong arrangement of
the load.

●

The filters in the base of the washing compartment are dirty or
incorrectly positioned.

●

Too little or no detergent has been used.

●

Where there are limescale deposits on the dishes; the salt container
is empty or the wrong level of the water softener has been selected.

●

The drain hose connection is not correct.

●

The salt container cap is not properly closed.

The dishes are wet and dull

●

Rinse aid was not used.

●

The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses
and dishes

●

Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

●

Increase rinse aid dosing.

●

The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.

152963030en per uk.qxp 22/03/2004 9.51 Pagina 35

«
...
33
34
35
36
37
...
»

Содержание FAVORIT 84470

















































Отзывы:

Нет отзывов