AEG FAVORIT 64470 I Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 36

AEG FAVORIT 64470 I Скачать руководство пользователя страница 25

....the wash result is not satisfactory.

The dishes are still dirty.

•

The wrong programme was selected.

•

The dishes were loaded is such a way that the wash water did not
reach all items. The baskets for the dishes must not be overloaded.

•

The filters in the base of the washing compartment are dirty or
incorrectly positioned.

•

Good quality detergent was not used, or too little was used.

•

In the case of scale deposits on the dishes: The special salt dispenser
is empty or the water softener has been incorrectly adjusted.

•

The drain hose is incorrectly laid.

The dishes do not dry and are not shiny.

•

Poor quality rinse aid used.

•

The rinse aid dispenser is empty.

There are smears, streaks, milky spots or a shiny bluish
coating on glasses and dishes.

•

Lower rinse aid dosage.

There are dried water drops on the glasses and dishes.

•

Increase rinse aid dosage.

•

The detergent may be the cause. Contact the detergent
manufacturer's customer advice centre.

Glasses corroded

•

Contact the detergent manufacturer's customer advice centre.

Operating instructions

25

152967 82/0en 1-12-2003 11:17 Pagina 25

«
...
23
24
25
26
27
...
»

Содержание FAVORIT 64470 I





































Отзывы:

Нет отзывов