AEG FAVORIT 54750, Инструкция, Страница: 34 / 52

Operating instructions
34
Something not working
Certain problems are due to the lack of simple maintenance or
oversights, which can be solved with the help of the instructions given
here, without calling out an engineer.
Important: If you call out an engineer to a fault listed below or to
repair a fault caused by incorrect use or installation a charge will be
made, even if the appliance is in guarantee.
...a flashing fault code appears
The dishwasher will not start or stops during operation.
The intervention of an alarm is indicated by:
- the continuous flashing of the indicator light of the running
programme,
- a combination of flashing and pauses of the end of programme
indicator light (as described in the chart).
Open the door and carry out the following suggested corrective
actions.
- continuous flashing of
the indicator light of
the running programme
- 1 flash of the indicator
light "end of
programme".
The machine does not fill
with water
The water tap is blocked or
furred with limescale.
The water tap is turned off.
The filter (where present) in
the threaded hose fitting at
the water inlet valve is
blocked.
Clean out the sink spigot. The sink spigot is blocked.
Check the water drain
hose connection.
Clean the water tap.
Turn the water tap on.
Clean the filter in the
threaded hose fitting.
The water inlet hose has not
been correctly laid or it is
bent or squashed. Check the water inlet hose
connection.
The water drain hose has not
been correctly laid or it is
bent or squashed.
Fault code / Malfunction Possible cause Solutions
- continuous flashing of
the indicator light of
the running programme
- 2 flashes of the
indicator light "end of
programme".
The dishwasher will not
drain
152955 17/2en 13-10-2005 15:59 Pagina 34