AEG FAVORIT 50874, Руководство пользователя, Страница: 22 / 28

Problem Possible cause Possible solution
Dry water drop stains on
glasses and dishes.
Rinse aid dosage is too low. Increase the rinse aid dosage.
The detergent can be the cause. Use a different brand of deter -
gent.
The dishes are wet. You have set a washing pro -
gramme without drying phase
or with a decreased drying
phase.
Let the door stay ajar for some
minutes before you remove the
dishes.
The dishes are wet and dull. The rinse aid dispenser is emp -
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on.
(The rinse aid dispenser is au -
tomatically off).
Activate the rinse aid dispenser.
Refer to 'How to activate the
rinse aid dispenser'.
How to activate the rinse aid dispenser
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C.
– The indicator lights for function buttons A, B, and C start to flash.
4. Release function buttons B and C.
5. Press function button B.
– The indicator lights for function buttons A and C go off.
– The indicator light for function button B continues to flash.
– The display shows the current set.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
6. Press function button B again.
– The display shows the new adjustment.
7. Switch off the appliance to keep the operation.
Technical data
Dimensions Width 596 mm
Height 850 mm
Depth 625 mm
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Water supply
1) Cold water or hot water maximum 60 °C
Capacity Place settings 12
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
22 Technical data