19
3.
Press function button
4
.
The
3 IN 1
indicator indicates the current setting:
4.
Pressing function button
4
changes the setting.
5.
If the
3 IN 1
indicator is indicating the desired setting, press the ON/
OFF button. The setting is now saved.
Before the start of the dishwashing cycle put 3in1 detergent in the de-
tergent dispenser.
3
As the rinse aid inflow is automatically switched off when the 3in1
function is activated, it may come about because of the different qual-
ity standards in the 3in1 detergent, that the dishes do not dry suffi-
ciently.
If this happens, proceed as follows (see section “Adding rinse aid”):
•
Fill up the dispenser (if this is empty) with rinse aid.
•
Set rinse aid dosage to “2” mechanically.
•
Activate rinse aid inflow.
If you do not want to use 3in1 products any more
If you want to stop using 3in1 products, please do the following:
•
Deactivate the 3in1 function.
•
Fill up the dispensers for salt and rinse aid again.
•
Switch the water softener to the highest setting and perform up to
three normal cycles without loading any dishes.
•
Then set the water softener to the water hardness in your area.
Indicator
3 IN 1
is lit
3 in 1 function activated
Indicator
3 IN 1
is not lit
3 in 1 function not activated
(factory setting).
Содержание FAVORIT 50660
Страница 1: ...FAVORIT 50660 Dishwasher User information ...