AEG FAVORIT 44850 Скачать руководство пользователя страница 23

Operating instructions

23

Malfunction

The indicator for the
selected programme is
flashing: 

Error code 

is

displayed in the multi-
display: There is no water
running into the
dishwasher.

The tap is blocked or
furred with limescale. 

The tap is turned off.

The filter (where present) in
the threaded hose fitting at
the water inlet valve is
blocked

Clean tap.

Turn the tap on.

Clean the filter in the
threaded hose fitting.

The water inlet hose has not
been correctly laid.

Check hose installation.

Possible cause

Remedy

Filters in the base of the
washing compartment are
blocked.

Press the button for the
selected programme; 
then cancel the programme
by pressing RESET (see
chapter: Starting a
programme); Clean out the
filters. (See chapter:
Cleaning the filters).

What to do when...

Remedying minor faults

If one of the following fault codes is displayed in the multi-display
during operation:
- Fault code 

(Problems with water inflow),

- Fault code 

(Problems with water outflow),

please have a look at the following table.

When the fault is remedied, close the dishwasher if necessary, press the
button for the programme that has started. The programme will
continue.

With other fault codes:
- Cancel the programme.
- Switch the appliance off and on again.
- Re-set the programme.
In the fault is displayed again, please contact your local Service Force
Centre and inform them of the fault code.

152966 38/0en  19-01-2004  9:20  Pagina 23

Содержание FAVORIT 44850





































Отзывы: