AEG FAVORIT 44070 i Скачать руководство пользователя страница 24

24

If the dishwashing results are not satisfactory

The dishes are still dirty.

The wrong dishwashing cycle was selected.

The dishes were loaded is such a way that the dishwashing water did 
not reach all items. The baskets for the dishes must not be overload-
ed. 

The filters in the base of the washing compartment are dirty or incor-
rectly positioned.

Good quality detergent was not used, or too little was used.

In the case of scale deposits on the dishes: The special salt dispenser is 
empty or the water softening system has been incorrectly set.

The drain hose is incorrectly positioned.

The dishes do not dry and are not shining.

Poor quality rinse aid was used.

The rinse aid dispenser is empty.

There are smears, streaks, milky spots or a shiny bluish coating on 
glasses and dishes.

Lower rinse aid dosage.

There are dried water drops on the glasses and dishes.

Increase rinse aid dosage.

The detergent may be the cause. Contact the detergent manufactur-
er's customer advice centre.

Glass corrosion

Contact the detergent manufacturer's customer advice centre.

Rust spots are visible in the 
dishwashing compartment.

The dishwashing compart-
ment is made from rust-free 
stainless steel. Rust spots in 
the dishwashing compart-
ment are due to rust parti-
cles from external sources 
(rust particles from water 
pipes, pans, cutlery, etc.). 
Remove such spots with a 
commercially-available 
stainless steel cleaning 
product.

Only wash cutlery, dish-
es and pans that are 
suitable for dishwasher 
use.

A whistling noise can be 
heard when washing dishes.

The whistling is not a cause 
for concern.

Use a different brand of 
detergent.

Malfunction

Possible cause

Remedy

Содержание FAVORIT 44070 i





































Отзывы: