AEG F99705IM0P, Руководство пользователя

Страница: 12 / 28

Options Values Description
ProBoost ON
OFF (default value) The use of this option gives
very good washing results
for heavy soiled dishes. The
water pressure in the pre-
wash and washing phases is
increased.
Settings Enter appliance settings
7.2
How to set an option
The option list will show only the options
applicable to the currently selected
programme. Non applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate
one of the options.
When the programme is completed or is
cancelled the options are set to the
default values.
You can enter the option list from any
programme in the programme list.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the value
from OFF to ON or vice versa.
4. To go back to the programme list,
press the Back .
The display shows the selected
programme.
If you want to set another option, repeat
the procedure.
7.3 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The option XtraDry is not a permanent
option and must be selected at every
cycle.
7.4
ExtraHygiene
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
7.5 TimeSaver
This option increases the pressure and
the temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
The washing results are the same as with
the normal programme duration but the
drying results can be less satisfactory.
The option is not applicable to all the
available programmes.
When the option is applicable to the
programme, you can choose to activate
or deactivate the TimeSaver option.
If you have also set an
option that is in conflict with
TimeSaver, it will not be
possible to choose
TimeSaver.
Select a programme and press the OK
key.
If TimeSaver is applicable, the display
shows the conditions Fast and Normal
and the programme duration for each
condition:
• Fast: select this condition to
activate TimeSaver and press the
OK key to confirm.
• Normal: select this condition to
deactivate TimeSaver and press
the OK key to confirm.
www.aeg.com 12