AEG F55210VI0, Руководство пользователя, Страница: 14 / 20

Problem and alarm code Possible solution
The appliance does not drain the wa-
ter. • Make sure that the drain hose is correctly con-
nected.
• Make sure that the filters in the appliance are
clean.
• Make sure that the kitchen sink drains correct-
ly.
Once you have checked the appliance,
set and start the programme again. If the
problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
The necessary information for the Service
Centre is on the rating plate. record this
information:
• Model ......................
• Serial number (SN.) ......................
9.2 The washing and drying results are not satisfactory
Problem Possible cause Possible solution
The dishes are not clean. The selected programme
was not applicable for the
type of load and/or for the
degree of soil. Make sure that the pro-
gramme is applicable for the
type of load and/or for the
degree of soil.
The basket was not loaded
correctly, water did not
reach all surfaces. Load the basket correctly.
The spray arm could not turn
freely because of the incor-
rect arrangement of the
load. Make sure that the spray arm
can turn freely before you
start a programme.
The filters are clogged. Make sure that the filters are
clean.
The filters are not correctly
assembled and installed. Make sure that the filters are
correctly assembled and in-
stalled.
The quantity of detergent
was not enough or no deter-
gent was used. Make sure that a correct
amount of detergent is used.
Scale particles on the dishes. The salt container is empty. Fill the salt container with
specific salt for dishwashers.
The cap of the salt container
is not closed correctly. Make sure that the salt con-
tainer is correctly closed.
There are streaks or milky
stains on glasses and dishes. The level of the water soft-
ener is too high. Set the water softener to a
lower level.
www.aeg.com 14