background image

OPERATION

B. Notes on CD-Rs (recordable
CDs)/CD-RWs (rewritable CDs):

1. Be sure to use discs with following
    marks only for the unit to play:

Recordable

Rewritable

2. The unit cannot play a CD-R and
    CD-RW that is not finalized. (Please
    refer to the manual of your
    CD-R/CD-RW recorder or
    CD-R/CD-RW software for more
    information on finalization process).

3. Depending on the recording status,
    conditions of the disc and the
    equipment used for the recording, 
    some CD-Rs/CD-RWs may not be 
    played on this unit. (see *1)

*1: To have more reliable play back, 
     please see following 
     recommendations:
   a: Use CD-RWs with speed 1x to 4x
       and write with speed 1x to 2x.
   b. Use CD-Rs with speed 1x to 8x 
       and write with speed 1x to 2x.
   c. Do not play a CD-RW which has
       been written for more than 5 
       times.

C. Notes on MP3 files (MP3 Version
Only):

1. The disc must be in the ISO9660 level
    1or level 2 format, or Joliet or Romeo 
    in the expansion format.
2. When naming a MP3 file, be sure the
    file name extension is ".MP3".
3. For a non-MP3 file, even though the file
    name extension is ".MP3", the unit
    cannot recognize it.

16

Содержание CS FMP 200





















Отзывы: