manualshive.com logo in svg

AEG Compumaster 1000, Руководство по эксплуатации, Страница: 26 / 29

Поделиться
Скачать
AEG Compumaster 1000 Скачать руководство пользователя страница 26

In the case that the mains distribution will be switched

off every evening the same must be done with the UPS to
avoid unnecessary battery discharge. Otherwise the 

 will be started automatically because for the UPS

it seems to be a mains failure.

This w-ill lead to a reduction of the usable life of the
battery.

Caused by completely discharged battery (e.g. unit

hadn’t been switched off by mistake despite a 
lasting mains failure or because of the self-discharge

nature of the battery during a longer storage period)
unlogical signalling states eventually may occur. This
can be normally eliminated without problems and has
no influence on the reliability of the UPS later on.

If the LED 

 is blinking after switching on

the UPS the unit should stay at this state for approx. 3
hours with respect to battery charging. Afterwards the
UPS must be switched off for approx. 1 minute. Follo-

wing this procedure the UPS should be switched on

again. Now only LED 

 should 

be 

blinking.

5 6

Содержание Compumaster 1000






























Отзывы:

Нет отзывов