61
What to do if
…
Problem
Possible cause
Remedy
The cooking zones are not
functioning.
Consult the operating instructions for the built-in cooking
surface
The oven does not heat
up
The oven is not switched on
Switch the oven on
The clock is not set
Set the current time on the
clock
The required settings have
not been set
Check the settings
The oven’s safety cut-out has
been tripped
See “Safety fuse”
The fuse in the house’s elec-
trical wiring (fuse box) has
been tripped
Check fuse. If the fuses trip
repeatedly, please call an au-
thorised electrician
The oven lighting is not
operating
The oven bulb is faulty
Change the oven bulb
Pyroluxe is not working
(“C1” appears in the clock
display)
The oven shelf supports have
not been removed
Remove oven shelf support
The oven does not heat
up. Time
is lit
Demo mode is on
Keep Selection
button
pressed for 2 seconds, then
within 2 seconds press and
hold buttons Selection
and
for 2 seconds
F11 appears in the clock
display
The meat probe has short
circuited or the plug of the
meat probe is not firmly in
position in the socket
Insert the plug of the meat
probe as far as it will go into
the socket on the side wall of
the oven
F2 appears in the clock
display
Door not properly closed or
door lock defective
Close door properly;
Turn the appliance off and
on again via the house fuse
or the safety switch in the
fuse box;
If displayed again, please
contact the Customer Care
Department