16
Installing the hood between cupboards with
hanging rails
Remove the grease filters.
Fig. 6
.
Take off the visor G.
Fig. 13
.
Mount the two hanging rails directly underneath the edge of
the cupboard using three screws 4,5 x 16 mm in each rail.
Distance from first hole to front edge of the cupboards sides
must be 153 mm.
Fig. 8
.
Push the extractor hood over the two hanging rails, then fix the hood
from its inside to the cupboards sides with two screws (4,5 x 13)
through the lower holes of the hood.
Fig. 9
.
Refit the visor.
Fig. 13
.
Refit the grease filters.
Fit the spacer
M
on the hood with two screws
O
and washers,
ensure that there is not a gap between the back of the hood and the
wall by adjusting the spacer
M
tightly to the wall, using the screws
O
.
Fig. 11
.
153
Fig. 8
Fig. 9