background image

Operating Instructions

71

Operating Instructions

Safety

The safety aspects of this appliance comply with accepted technical 
standards and the German Appliance Safety Law. However, as manufac-
turers we also believe it is our responsibility to familiarise you with the 
following safety instructions.

Electrical Safety

The installation and connection of the new appliance must only be 
carried out by qualified personnel.

Repairs to the appliance are only to be carried out by approved serv-
ice engineers. Repairs carried out by inexperienced persons may cause 
injury or serious malfunctioning. If your appliance needs repairing, 
please contact your local AEG customer center or your dealer.

Please follow these instructions, otherwise the warranty is void in the 
event of damages.

Flush-mounted appliances may only be operated following installa-
tion in suitable installation cabinets and workplaces which conform 
to the relevant standards. This ensures sufficient protection against 
contact for electrical units as required by the VDE [Association of 
German Electrical Engineers].

If your appliance malfunctions or if fractures, cracks or splits appear:
– switch off all cooking zones,
– disconnect the hob from the electricity supply.

Child Safety

The cooking zones will become hot when you cook. Therefore, always 
keep small children away from the appliance.

Safety During Use

This appliance may only be used for normal cooking and frying in the 
home. It is not designed for commercial or industrial purposes.

Do not use the hob to heat the room.

Take care when plugging electric appliances into mains sockets near 
the hob. Connection leads must not come into contact with the hot 
surface.

Содержание C6410K





































Отзывы: