AEG C6400K, Руководство по эксплуатации и установке

Страница: 23 / 34

Operating Instructions
119
What do I do if ...
Rectifying faults
It is possible that faults have been caused by a minor error, which you
can correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
1
Warning! Repairs to the appliance are only to be carried out by
approved service engineers. Improperly effected repairs may result in
considerable risk to the user. If your appliance needs repairing, please
contact your specialist dealer or customer service.
What to do if ...
.... the F 2 5 display lights up?
Your appliance has been wrongly
connected.
0 Disconnect the appliance from the
mains supply.
The mains connection must be re-
wired appropriately.
Contact a registered specialist to do
this.
... the cooking zones will not function?
0 Check, whether
– the mains fuse (in the household fuse box) is intact.
– the appliance is correctly switched on.
– the control lamps of the control panel are lighting.
– the appropriate cooking zone has been switched on.
– the cooking zones are set to the required setting to finish cooking
(see section "Cooking").
– the cooking zones have been switched off by the safety cutout (see
section "Safety Functions").
... cooking zones cannot be switched on?
0 Check, whether
– the control panel is locked (see section "Child-Safety Device").
– more than 10 seconds have elapsed between operating the On/Off
button and switching on the desired cooking zone (see section
"Switching on the appliance").
– the touch controls are entirely or partly covered by liquid or by a wet
cloth.