AEG BSS 4818, Инструкция по эксплуатации

Страница: 54 / 94

English
54
Troubleshooting
Symptoms Possible cause Solution
Cannot switch the
speaker on Battery empty Charging the Integrated Battery
(
Page 51 )
Audio cable is connected Disconnect the cable.
No audio signal during
Bluetooth connection Speaker is switched off Switch the speaker on.
Speaker is not paired to the
audio source. Check whether the connection
exists. If necessary, pair the
speaker to the audio source
again.
Audio cable is connected. The Bluetooth connection is
automatically separated when a
cable is connected to the
3.5 mm plug. Remove the cable.
Volume too low Increase the volume on the
loudspeaker.
Increase the volume on the
audio source.
Cannot connect
speaker Pairing does not work Check, whether the audio source
supports the A2DP protocol.
Audio source is turned off Turn the audio source on
Bluetooth is turned off on the
audio source. Turn the Bluetooth function on in
the audio source.
Bluetooth version is not sup-
ported. Use another playback unit.
Technical Specifications
Model: .......................................................................................................................................BSS 4818
Audio connection: ........................................................................................3.5 mm stereo jack plug
Net weight: .................................................................................................................
approx. 0.247 kg
Power supply: .................................................................................................................DC 5 V 500mA
Battery: ......................................................................................................3.7 V 750 mAh lithium-Ions
Charging time: ..........................................................................................................
approx. 1.5 hours
Operating time: ..................................................................................... approx. 8 hours (vol. = 50%)