agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
10.2
Removing the shelf
supports
To clean the oven, remove the shelf
supports.
1.
Pull the front of the shelf support
away from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
Install the shelf supports in the opposite
sequence.
10.3
Oven ceiling
WARNING!
Deactivate the appliance
before you remove the
heating element. Make sure
that the appliance is cold.
There is a risk of burns.
Remove the shelf supports.
You can fold down the heating element
on the oven ceiling to clean the oven
ceiling easily.
1.
Hold the heating element with two
hands at the front.
2.
Pull it forwards against the spring
pressure and out along the supports
on the two sides.
The heating element folds down.
3.
Clean the oven ceiling.
4.
Install the heating element in the
opposite sequence.
Install the heating element
correctly above the supports
on the inner walls of the
appliance.
5.
Install the shelf supports.
10.4
Removing and installing
the door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
Be careful when you remove
the door from the appliance.
The door is heavy.
1.
Open the door fully.
2.
Fully press the clamping levers (A) on
the two door hinges.
A
A
3.
Close the oven door to the first
opening position (approximately 70°
angle).
4.
Hold the door with one hand on each
side and pull it away from the
appliance at an upwards angle.
www.aeg.com
24
Содержание BE1400300X
Страница 1: ...EN User Manual Oven BE1400300X BE4003001M BE400302WM ...
Страница 28: ...www aeg com shop 867302329 G 372016 ...