AEG ATB81011NX, Руководство пользователя

Страница: 10 / 16

Problem Possible cause Solution
The appliance is noisy. The appliance is not suppor-
ted properly. Check if the appliance
stands stable.
Audible or visual alarm is on. The cabinet has been re-
cently switched on.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
The temperature in the ap-
pliance is too high. Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
The compressor operates
continually. Temperature is set incorrect-
ly. Refer to "Operation" chap-
ter.
Many food products to be
frozen were put in at the
same time. Wait a few hours and then
check the temperature
again.
The room temperature is too
high. Refer to climate class chart
on the rating plate.
Food products placed in the
appliance were too warm. Allow food products to cool
to room temperature before
storing.
The door is not closed cor-
rectly. Refer to "Closing the door".
The FROSTMATIC function
is switched on. Refer to "FROSTMATIC
function".
There is too much frost and
ice. The door is not closed cor-
rectly or the gasket is de-
formed/dirty. Refer to "Closing the door".
Food products are not wrap-
ped properly. Wrap the food products bet-
ter.
The compressor does not
start immediately after
pressing the FROSTMATIC,
or after changing the tem-
perature. This is normal, no error has
occurred. The compressor starts after a
period of time.
Water flows on the floor. The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor. Attach the melting water
outlet to the evaporative
tray.
Temperature cannot be set. The FROSTMATIC function
is switched on. Switch off FROSTMATIC
manually, or wait until the
function resets automatically
to set the temperature. Refer
to "FROSTMATIC function"
www.aeg.com 10