31
31
Avoid wearing clothing that is loose fitting or that has hanging cords
or ties.
Always wear safety glasses with side shields.
Always be sure of your footing.
Keep firm footing and balance.
Walk, never run.
Always be sure of your footing on slopes.
Use the product across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not use the product near drop-offs, ditches, excessively
steep slopes, or embankments.
Poor footing could cause a slip-
and-fall accident.
WORK AREA SAFETY
Never use product while people, especially children, or pets
are within 15 m because of the danger of objects being thrown
by contact with the blade.
Objects struck by the lawn mower blade can cause severe
injuries to persons.
Thoroughly inspect the area where the product
is to be used and remove all rocks, sticks, metal, wire, bones, toys,
or other foreign objects. Remember, string or wire may entangle
with the cutting means.
Always use the product in the daylight or in good artificial light.
Do not operate the product in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
The
product creates sparks which may ignite the dust or fumes.
Do not operate the product in wet grass or in the rain.
Do not use the product when there is a risk of lightning.
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
Tragic accidents can occur if the operator is not alert to the
presence of children.
Children are often attracted to the product
and the mowing activity. Never assume that children will remain
where you last saw them.
Keep children out of the mowing area and under the watchful
care of a responsible adult other than the operator, be alert and
turn the product off if a child enters the area.
Use extra care when approaching blind corners, shrubs, trees,
or other objects including overhanging shrubs, etc. which may
block your view.
TECHNICAL DATA
CORDLESS LAWN MOWER
ALM58LI401
ALM58B
Rated voltage
58 V DC
58 V DC
Width of cut
46 cm
46 cm
Height of cut
25 - 75 mm
25 - 75 mm
Rated input
1200 W
1200 W
No load speed
2800/min
2800/min
Weight (without battery)
26.8 kg
26.8 kg
Grass catcher capacity
50 L
50 L
Blade length
46 cm
46 cm
Cutting capacity
46 cm
46 cm
BATTERY AND CHARGER
Battery pack
ABP58LI-401
Not included
Charger
ABC58S
Not included
Compatible battery
ABP58LI-401/ABP58LI-201
ABP58LI-401/ABP58LI-201
Compatible charger
ABC58S
ABC58S
REPLACEMENT PART
Blade
AAC4001 (682092)
BATTERY TOOL USE AND CARE
Read, understand and always follow the safety instructions
which came with your battery and charger.
Failure to do so may
result in electric shock, fire or other hazardous situations. Keep all
the instructions together in a safe place for future reference.
Battery-operated products do not have to be plugged into
an electrical outlet; therefore, they are always in operating
condition.
Remove the start key whenever you are not operating
the product.
Remove the battery pack before making any adjustments,
cleaning, or removing material from the product.
Ensure the start key is removed before inserting battery pack.
A battery pack must be recharged only with the charger
specified by the manufacturer.
Using a charger with an
incompatible battery pack may create a risk of fire. Use battery pack
only with charger listed.
Use only battery pack intended specifically for the product.
Use of any other battery packs may result in a risk of fire, electric
shock, or injury to persons.
When battery pack is not in use, keep it away from other metal
objects like, paper clips, coins, keys, nails, screws, or other
small metal objects, that can make a connection from one
terminal to another.
Shorting the battery pack terminals together
may cause sparks, burns, fire, or explosion.
Do not place battery products or their batteries near fire or
heat.
This increases the risk of explosion and possibly injury.
Do not open or mutilate the battery pack.
Released electrolyte
is corrosive and may cause damage to the eyes or skin. It may be
toxic if swallowed.
Protect the battery pack against moisture and water.
Do not
charge the product in a damp or wet location. Following this rule will
reduce the risk of electric shock.
In case of damage and improper use of the battery, vapour may
be emitted.
Provide for fresh air and seek medical help in case of
complaints. The vapour can irritate the respiratory system.
Do not leave the battery pack inside a vehicle in hot or cold
conditions.
Do not incinerate the battery.
Under abusive conditions, liquid may be ejected from the
battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
LAWN MOWER SAFETY WARNINGS
Before using, always visually inspect to ensure blades, blade
bolts, and cutter assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to preserve
balance.
The blade on this mower is sharp, use extreme caution and
wear heavy duty gloves when fitting, replacing, cleaning or
checking bolt security.
Bring the product to an authorised service centre to replace
damaged or unreadable labels.
Check all nuts, bolts, and screws at frequent intervals for
proper tightness to be sure the equipment is in safe working
condition.
Check the grass catcher frequently for wear, holes, or
deterioration.
Replace worn or damaged parts before operating the product.
The mower must be started with the user behind the handlebars
in the operator safety zone.
Never start the product if:
■
all four wheels are not on the ground
■
the grass discharge chute is exposed without being protected
by either the mulching plug and grass discharge chute cover, or
the grass catcher and grass discharge chute cover
■
hands and feet of all persons are not clear of the cutting
enclosure
Never operate the product if the on/off switch on the handlebar
does not properly start and stop the mower.
Never attempt to lock the on/off switches in the on position,
this is extremely dangerous.
Do not force the product.
It will do the job better and safer at the
speed for which it was designed.
Stop the blade when crossing gravel surfaces.
Do not pull the product backward unless absolutely necessary.
If you must back the product away from a wall or obstruction, first
look down and behind to avoid tripping or pulling the product over
your feet.
Stop the motor and allow the blade to stop if the mower has to
be tilted for transportation when crossing surfaces other than
grass, and when transporting the product to and from the area
to be mowed.
Never use the product with defective guards or shields, or
without safety devices, for example, deflectors and/ or grass
catcher, in place.
Do not tilt the lawn mower when switching on the motor or
while the motor is running.
This exposes the blade and increases
the probability of objects being thrown.
Switch on the motor carefully according to instructions and
keep hands and feet away from cutting area.
Keep clear of
the discharge opening at all times. Do not start the product when
standing in front of the discharge opening.
Do not put hands or feet near or under rotating parts.
Keep
clear of the discharge opening at all time.
Never pick up or carry the product while it is running.
Stop the mower motor and remove start key, make sure that all
moving parts have come to a complete stop for the following
cases:
■
whenever you leave the product unattended (including disposal
of grass clippings)
■
before cleaning a blockage or unclogging discharge chute
■
before checking, cleaning or working on the product
■
after striking a foreign object; inspect the product for damage
and make repairs as necessary before restarting and operating
the product
■
before removing the grass catcher or opening the grass
discharge chute cover
If the product starts to vibrate abnormally (check immediately):
■
inspect for damage, particularly the blades
■
replace or repair any damaged parts
■
check for and tighten any loose parts
Avoid holes, ruts, bumps, rocks, property stakes, or other
hidden objects.
Uneven terrain could cause a slip-and-fall
accident.
Always ensure the motor control cable is never trapped,
pinched, or otherwise damaged during assembly or when
folding the handle.
OVERLOAD, OVERHEAT, AND TILT PROTECTION
The product has an overload protection device. When overloading
is detected, the product will automatically switch off. If the overload
protector is actuated, the on-off button must be released. Press the
on-off button to restart the product.
The product has overheat protection. Excessive temperatures will
Содержание ALM58B
