AEG A58CHS18B4, Оригинальное руководство пользователя

Страница: 26 / 36

26
26
Save all warnings and instructions for future reference.
The term “power tool’’ in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power
tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators.
There is an increased
risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water
entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
When operating a power tool outdoors, use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply.
Use of an RCD
reduces the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat or hearing protection used for appropriate conditions will reduce
personal injury.
Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with
your finger on the switch or energising power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before turning the power
tool on.
A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts.
Loose
clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used.
Use of dust collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your
application.
The correct power tool will do the job better and safer at
the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and
off.
Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed.
Use of the power
tool for operations different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the manufacturer.
A
charger that is suitable for one type of battery pack may create a risk
of fire when used with another battery pack.
Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire
When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause burns
or a fire.
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
ADDITIONAL GENERAL SAFETY WARNINGS
Some regions have regulations that restrict the use of the product.
Check with your local authority for advice.
Never allow children or people who are unfamiliar with the instructions
to use the product. Local regulations may restrict the age of the
operator.
Ensure before each use that all controls and safety devices function
correctly. Do not use the product if the OFF switch does not stop
the motor.
Wear full eye and hearing protection, strong sturdy gloves, and head
protection while operating the product. Use a face mask if operation
is dusty.
The use of hearing protection reduces the ability to hear warnings
(shouts or alarms). The operator must pay extra attention to what is
going on in the work area.
Keep firm footing and balance. Do not overreach. Overreaching can
result in loss of balance and can increase the risk of kickback.
Do not wear loose-fitting clothing, short trousers, or jewellery of any
kind.
Secure long hair so that it is above shoulder level to prevent
entanglement in moving parts.
Beware of thrown, flying, or falling objects. Keep all bystanders,
children, and animals at least 15 m away from the work area.
Do not operate the product in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
Operating similar tools nearby increases both the risk of hearing
injury and the potential for other persons to enter your work area.
Keep all parts of your body away from any moving part.
Inspect the product before each use. Check for correct operation of
all controls, including the chain brake. Check for loose fasteners, make
sure that all guards and handles are properly and securely attached.
Replace any damaged parts before use.
Do not modify the product in any way or use parts and accessories
that are not recommended by the manufacturer.
WARNING! If the product is dropped, suffers heavy impact,
or begins to vibrate abnormally, immediately stop the product
and inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by an
authorised service centre.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury,
and product damage due to short circuit, never immerse the
product, battery pack, or charger in fluid or allow fluid to flow
inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing
products, etc., can cause a short circuit.
CHAINSAW SAFETY WARNINGS
Keep all parts of the body away from the saw chain when
operating the product. Before you start the chainsaw, make
sure the saw chain is not contacting anything.
A moment of
inattention while operating chainsaws may cause entanglement of
your clothing or body with the saw chain.
Always hold the chainsaw with your right hand on the rear
handle and your left hand on the front handle.
Holding the
chainsaw with a reversed hand configuration increases the risk of
personal injury and should never be done.
Hold the product by the insulated gripping surface only, because
the saw chain may contact hidden wiring.
Saw chains contacting a
“live” wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.