AEG A58BCT18, Оригинальное руководство пользователя

Страница: 41 / 44

41
41
The product fitted with the line trimmer head (and appropriate guard) is
intended for cutting long grass, pulpy weed, and similar vegetation at or about
ground level.
When fitted with the blade (and appropriate guard), it can also cut bushes. The
cutting plane should be approximately parallel to the ground surface.
The product should not be used to cut or trim hedges, bushes, or other
vegetation where the cutting plane is not parallel to the ground surface. Do
not use the product for any purpose not listed in the Specified Conditions
of Use.
TRANSPORTATION AND STORAGE
■
Turn off the product, remove the battery pack, and allow the product to
cool down before storing or transporting.
■
Remove all foreign materials from the product. Store it in a cool, dry, and
well-ventilated place that is inaccessible to children. Keep the product
away from corrosive agents, such as garden chemicals and de-icing salts.
Do not store the product outdoors.
■
If a cutting blade is fitted, cover it with the blade protector.
■
For storage, always remove the battery pack.
■
For transportation in a vehicle, secure the product against movement or
falling to prevent injury to persons or damage to the product.
MAINTENANCE
WARNING! Use only AEG accessories and AEG spare parts. Failure to
do so can cause possible injury, contribute to poor performance, and may
void your warranty. Should components need to be replaced which have
not been described, please contact one of our AEG service agents (see our
list of guarantee/service addresses).
WARNING! Servicing requires extreme care and knowledge and
should be performed only be a qualified service technician. For service,
bring the product to an authorised service centre for repair. When
servicing, use only original replacement parts.
WARNING! Make sure that the nylon locking nut torque is ≥ 25 Nm
when assembling the blade. Failure to follow this procedure can result in
serious injury. Nylon locking nut should have at least 4 turns after finger
tight.
■
Turn off the product and remove the battery pack before conducting any
maintenance or cleaning work.
■
You may only make adjustments and repairs described in this manual. For
other repairs, contact an authorised service centre.
■
For the replacement line, use only nylon filament line of the diameter
described in the specification table of this manual.
■
After extending the new cutter line, always return the product to its
normal operating position before starting.
■
After each use, clean the product with a soft, dry cloth. Any part that
is damaged should be properly repaired or replaced by an authorised
service centre.
■
Check all nuts, bolts, and screws before each use and at frequent intervals
for proper tightness to ensure that the product is in safe working
condition. Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■
Bring the product to an authorised service centre to replace damaged or
unreadable labels.
Replacement parts
Part Accessory number Part number
Trimmer head AAC101 4932459666
Grass deflector 4931461345
Blade AAC100 4932459665
Blade guard 4931461344
Spare cutting line AAC102 4932459674
BATTERIES
Battery packs that have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs must be fully charged after used.
To obtain the longest possible battery life, remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
■
Store the battery pack where the temperature is below 27°C and away
from moisture.
■
Store the battery packs in a 30% - 50% charged condition.
■
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries must be done in accordance with local,
national, and international provisions and regulations.
■
The user can transport the batteries by road without further requirements.
■
Commercial transport of lithium-ion batteries by third parties is subject to
Dangerous Goods regulations. Transport preparation and transport are
exclusively to be carried out by appropriately trained persons and the
process must be accompanied by corresponding experts.
When transporting batteries:
■
Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
■
Ensure that the battery pack is secured against movement within
packaging.
■
Do not transport batteries that are cracked or leaking.
Check with forwarding company for further advice.
SYMBOLS
Safety alert
Read and understand all instructions before
operating the product. Follow all warnings and safety
instructions.
Wear eye, ear, and head protection.
Wear non-slip safety footwear when using the product.
Wear non-slip, heavy-duty gloves.
Do not expose the product to rain or damp conditions.
Beware of thrown or flying objects. Keep all
bystanders, especially children and pets, at least 15 m
away from the operating area.
Keep hands away from the cut-off blade.
Class II tool, double insulation
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advice.
The product is not intended for use with a toothed saw
type blade.
Beware of blade thrust.
Regulatory Compliance Mark (RCM). Product meets
applicable regulatory requirements.
The blade appropriate for the product and suited for
cutting pulpy weeds and vines.
7,500
Rotational direction and maximum speed of the shaft
for the cutting attachment.
101
Line trimmer
Guaranteed sound power level
105
Brushcutter
Guaranteed sound power level
The following signal words and meanings are intended to explain the levels of
risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.