AEG A51100HSW0, Руководство пользователя

Страница: 29 / 84

Problem Possible cause Solution
The lid has been opened often Try to not open the lid often
The lid has been opened for a
long time.
Do not leave the lid open longer
than necessary
It is too cold inside the
freezer
The temperature is not set cor -
rectly.
Set a warmer temperature
The appliance does not
work at all. Neither cool -
ing nor lighting works
Plug is not connected to the
mains socket properly
Connect the mains plug properly
Power does not reach the appli -
ance
Try connecting another electrical
device to the power outlet
The appliance is not switched on Switch on the appliance
There is no voltage in the mains
socket (try to connect another
appliance into it)
Call an electrician
Customer Service
If your appliance is still not working properly after making the above checks, contact the
nearest service centre.
To obtain fast service, it is essential that when you apply for it you specify the model and
serial number of your appliance which can be found either on the guarantee certificate or
on the rating plate located on the external right side of the appliance.
TECHNICAL DATA
Dimensions Height × Width × Depth (mm): Further technical information are situ -
ated in the rating plate on the external
right side of the appliance.
850 × 550 × 593
Rising Time
26 hours
INSTALLATION
Positioning
WARNING!
If you are discarding an old appliance that has a lock or catch on the lid, you must ensure
that it is made unusable to prevent young children being trapped inside.
The appliance shall have the plug accessible after installation.
This appliance can be installed in a dry, well ventilated indoor (garage or cellar), but for op -
timum performance install this appliance at a location where the ambient temperature cor -
responds to the climate class indicated on the rating plate of the appliance:
Technical data 29