AEG A18FIWMTF12 Скачать руководство пользователя страница 17

17

Under extreme stress, the battery electronics turn off the product 

automatically. To restart, turn the product off and then on again. 

If the product does not start up again, the battery pack may have 

discharged completely. Recharge the battery pack.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods 

Legislation requirements.

Transportation of those batteries has to be done in accordance with 

local, national, and international provisions and regulations.

•  Batteries can be transported by road without further requirement.

•  Commercial transport of lithium-ion batteries by third parties is 

subject to Dangerous Goods Regulations. Transport preparation 

and transport are exclusively to be carried out by appropriately 

trained persons and the process has to be accompanied by 

corresponding experts.

When transporting batteries:

•  Ensure that the battery contact terminals are protected and 

insulated to prevent short circuit.

•  Ensure that the battery pack is secured against movement within 

the packaging.

•  Do not transport batteries that are cracked or leaking.

Check with the forwarding company for further advice.

MAINTENANCE

The ventilation slots of the product must be kept clear at all times. 

Avoid using solvents when cleaning plastic parts. Most plastics are 

susceptible to various types of commercial solvents and may be 

damaged by their use. Use clean cloths to remove dirt, carbon dust, 

etc.

Use only AEG accessories and AEG spare parts. Should 

components need to be replaced which have not been described, 

please contact one of our AEG service agents (see our list of 

guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please state 

the Article No. as well as the product type printed on the label and 

order the drawing at your local service agents or directly at: 

Techtronic Industries Australia Pty Ltd

PO Box 1065

 

Mount Waverley VIC 3149 

Tel. no. 1300 234 797 

Australia

Techtronic Industries N.Z. Limited

PO Box 12-806

 

Penrose AUCKLAND 1642

 

Tel. no. 0800 234 797(0800 AEGPWR)

 

New Zealand

SYMBOLS

Read the instructions carefully before starting the 

product.

CAUTION! WARNING! DANGER!

Remove the battery pack before starting any work on 

the product.

Accessory - Not included in standard equipment, 

available as an accessory.

Wear eye protection.

Wear protective gloves.

To reduce the risk of injury or damage, avoid contact 

with any hot surface.

Do not dispose of waste batteries, waste electrical and 

electronic equipment as unsorted municipal waste. 

Waste batteries and waste electrical and electronic 

equipment must be collected separately. Waste 

batteries, waste accumulators, and light sources have to 

be removed from the equipment. Check with your local 

authority or retailer for recycling advice and collection 

point. According to local regulations, retailers may have 

an obligation to take back waste batteries and waste 

electrical and electronic equipment free of charge. 

Your contribution to the reuse and recycling of waste 

batteries and waste electrical and electronic equipment 

helps to reduce the demand of raw materials. Waste 

batteries, in particular containing lithium, and waste 

electrical and electronic equipment contain valuable 

and recyclable materials, which can adversely impact 

the environment and the human health if not disposed 

of in an environmentally compatible manner.  Delete 

personal data from waste equipment, if any.
No-load speed

V

Volts

Direct current

Regulatory Compliance Mark (RCM). Product meets 

applicable regulatory requirements.

Содержание A18FIWMTF12





















Отзывы: