AEG A18CS57BL, Оригинальное руководство пользователя

Страница: 26 / 28

26
ENGLISH
If a saw blade binds, it may walk up or kickback from the workpiece
as the saw is restarted.
6XSSRUWODUJHSDQHOVWRPLQLPLVHWKHULVNRIEODGHSLQFKLQJ
DQGNLFNEDFN
Large panels tend to sag under their own weight.
Supports must be placed under the panel on both sides, near the
line of cut and near the edge of the panel.
'RQRWXVHGXOORUGDPDJHGEODGHV 8QVKDUSHQHGRULPSURSHUO\
set blades produce narrow kerf causing excessive friction, blade
binding and kickback.
%ODGHGHSWKDQGEHYHODGMXVWLQJORFNLQJOHYHUVPXVWEHWLJKW
DQGVHFXUHEHIRUHPDNLQJWKHFXW
If blade adjustment shifts while
cutting, it may cause binding and kickback.
8VHH[WUDFDXWLRQZKHQVDZLQJLQWRH[LVWLQJZDOOVRURWKHU
EOLQGDUHDV
The protruding blade may cut objects that can cause
kickback.
Lower guard function
&KHFNWKHORZHUJXDUGIRUSURSHUFORVLQJEHIRUHHDFKXVH'R
QRWRSHUDWHWKHVDZLIWKHORZHUJXDUGGRHVQRWPRYHIUHHO\
DQGFORVHLQVWDQWO\1HYHUFODPSRUWLHWKHORZHUJXDUGLQWRWKH
RSHQSRVLWLRQ
If the saw is accidentally dropped,the lower guard
may be bent. Raise the lower guard with the retracting handle and
make sure it moves freely and does not touch the blade or any other
part, in all angles and depths of cut.
&KHFNWKHRSHUDWLRQRIWKHORZHUJXDUGVSULQJ,IWKHJXDUGDQG
WKHVSULQJDUHQRWRSHUDWLQJSURSHUO\WKH\PXVWEHVHUYLFHG
EHIRUHXVH
Lower guard may operate sluggishly due to damaged
SDUWVJXPP\GHSRVLWVRUDEXLOGXSRIGHEULV
7KHORZHUJXDUGPD\EHUHWUDFWHGPDQXDOO\RQO\IRUVSHFLDO
FXWVVXFKDV³SOXQJHFXWV´DQG³FRPSRXQGFXWV´5DLVHWKH
ORZHUJXDUGE\WKHUHWUDFWLQJKDQGOHDQGDVVRRQDVWKHEODGH
HQWHUVWKHPDWHULDOWKHORZHUJXDUGPXVWEHUHOHDVHG
For all
other sawing, the lower guard should operate automatically.
$OZD\VREVHUYHWKDWWKHORZHUJXDUGLVFRYHULQJWKHEODGH
EHIRUHSODFLQJWKHVDZGRZQRQEHQFKRUÀRRU
An unprotected,
coasting blade will cause the saw to walk backwards, cutting
whatever is in its path. Be aware of the time it takes for the blade to
stop after switch is released.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
'RQRWXVHDQ\DEUDVLYHZKHHOV
8VHRQO\EODGHGLDPHWHUVLQDFFRUGDQFHZLWKWKHPDUNLQJV
Identify the correct saw blade to be used for the material to be cut.
8VHRQO\VDZEODGHVWKDWDUHPDUNHGZLWKDVSHHGHTXDORUKLJKHU
than the speed marked on the tool.
8VHRQO\VDZEODGHVUHFRPPHQGHGE\WKHPDQXIDFWXUHUZKLFK
FRQIRUPWR(1LILQWHQGHGIRUZRRGDQGDQDORJRXVPDWHULDOV
Wear a dust mask.
&ODPSWKHZRUNSLHFHZLWKDFODPSLQJGHYLFH8QFODPSHG
workpieces can cause severe injury and damage.
'LUW\EODGHJXDUGVPD\OLPLWSURSHURSHUDWLRQRIWKHSURGXFW
resulting in serious personal injury. Clean the blade guards with
compressed air to ensure there is no accumulation of saw dust.
Wear proper eye and respiratory protection.
Raise the lower guard by the lever and ensure that the lower guard
returns to the original position. If the lower guard does not function
properly. Stop using the product and have it repaired.
7KHSURGXFWZLOOUHVWDUWDXWRPDWLFDOO\LIVWDOOHG7XUQRႇWKHSURGXFW
LPPHGLDWHO\LILWVWDOOV'RQRWWXUQRQWKHSURGXFWDJDLQZKLOHLWLV
still stalled, as doing so could trigger a sudden recoil with a high
UHDFWLYHIRUFH'HWHUPLQHZK\WKHSURGXFWVWDOOHGDQGUHFWLI\WKLV
paying heed to the safety instructions.
Remove the battery pack before starting any work on the product.
Ambient temperature range for tool during operation is between 0°C
DQGƒ&
Ambient temperature range for tool storage is between 0°C and
ƒ&
The recommended ambient temperature range for the charging
V\VWHPGXULQJFKDUJLQJLVEHWZHHQƒ&DQGƒ&
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
7RUHGXFHWKHULVNRI¿UHSHUVRQDOLQMXU\DQG
product damage due to a short circuit, never immerse your tool,
EDWWHU\SDFNRUFKDUJHULQÀXLGRUDOORZDÀXLGWRÀRZLQVLGHWKHP
&RUURVLYHRUFRQGXFWLYHÀXLGVVXFKDVVHDZDWHUFHUWDLQLQGXVWULDO
chemicals, and bleach or bleach containing products, etc., can
cause a short circuit.
'RQRWGLVSRVHRIXVHGEDWWHU\SDFNVLQWKHKRXVHKROGUHIXVHRU
E\EXUQLQJWKHP$(*'LVWULEXWRUVRႇHUWRUHWULHYHROGEDWWHULHVWR
protect our environment.
'RQRWVWRUHWKHEDWWHU\SDFNWRJHWKHUZLWKPHWDOREMHFWVVKRUW
circuit risk).
8VHRQO\6\VWHP$(*FKDUJHUVIRUFKDUJLQJ6\VWHP$(*EDWWHU\
SDFNV'RQRWXVHEDWWHU\SDFNVIURPRWKHUV\VWHPV
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
Never break open battery packs and chargers and store only in dry
URRPV.HHSGU\DWDOOWLPHV
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
LWRႇLPPHGLDWHO\ZLWKVRDSDQGZDWHU,QFDVHRIH\HFRQWDFWULQVH
thoroughly for at least 10 minutes and immediately seek medical
attention.
Ambient temperature range for battery during use is between 0°C
DQGƒ&
Ambient temperature range for battery storage is between 0°C and
ƒ&
SPECIFIED CONDITIONS OF USE
7KHFLUFXODUVDZLVLQWHQGHGIRUULSFXWWLQJDQGFURVVFXWWLQJRIZRRG
RUVLPLODUPDWHULDOVXSWRDPD[LPXPGHSWKRIPP7KHSURGXFW
FDQPDNHVWUDLJKWRUEHYHOOHGFXWVEHWZHHQDQGGHJUHHV
The product is to be used with the base of the tool in contact with
WKHZRUNSLHFH,WVKRXOGRQO\EHXVHGLQDGU\ZHOOOLWDQGZHOO
ventilated area.
The product is designed for handheld use. The product is not to be
PRXQWHGRQWRDZRUNEHQFK'RQRWXVHWKHSURGXFWIRUFXWWLQJPHWDO
or masonry.
'RQRWXVHWKHSURGXFWIRUDQ\RWKHUSXUSRVH
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.
7HPSHUDWXUHVLQH[FHVVRIƒ&ƒ)UHGXFHWKHSHUIRUPDQFHRI
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
)RUDQRSWLPXPOLIHWLPHWKHEDWWHU\SDFNVKDYHWREHIXOO\FKDUJHG
after used.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
)RUEDWWHU\SDFNVWRUDJHORQJHUWKDQGD\V
•
6WRUHWKHEDWWHU\SDFNZKHUHWKHWHPSHUDWXUHLVEHORZƒ&DQG
away from moisture.
•
6WRUHWKHEDWWHU\SDFNVLQDFKDUJHGFRQGLWLRQ
• Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
/LWKLXPLRQEDWWHULHVDUHVXEMHFWWRWKH'DQJHURXV*RRGV
/HJLVODWLRQUHTXLUHPHQWV
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
• The user can transport the batteries by road without further
UHTXLUHPHQWV
•
&RPPHUFLDOWUDQVSRUWRI/LWKLXP,RQEDWWHULHVE\WKLUGSDUWLHVLV
VXEMHFWWR'DQJHURXV*RRGVUHJXODWLRQV7UDQVSRUWSUHSDUDWLRQ
and transport are exclusively to be carried out by appropriately
trained persons and the process has to be accompanied by
corresponding experts.
:KHQWUDQVSRUWLQJEDWWHULHV