AEG 97153, Инструкция по эксплуатации

Страница: 23 / 96

English 23
•
The backup camera system may interfere with
other cordless equipment (e.g. mobile phones,
Bluetooth equipment) during use or receive in-
terference. Thus, do not use such equipment near
the backup camera system or this system near
other wireless equipment.
•
Extreme high or low temperatures or rapid
temperature changes may cause the camera to
not function properly or cause the monitor to not
show objects correctly.
•
Bright light hitting the camera lens directly may
result in objects being overexposed and not being
displayed clearly.
•
After using a car wash, the camera‘s detection
range may change due to mechanical effects. Be
sure to check for this and readjust the camera if
necessary.
Safety instructions for backup
camera installation
•
Before installing the backup camera system and
before each functionality test of the backup
camera system, secure the vehicle to prevent it
from rolling away.
Attention – risk of injury and property damage!
Always engage the hand brake and shift into
gear! Automatic transmissions must be put
into Park and the hand brake engaged!
•
Do not use the backup camera system to power
auxiliary automotive equipment or other external
devices.
•
When unsure about installation, operation or
the functionality of the backup camera system,
contact a trained specialist.
•
The equipment will heat up during use. Always
place the backup camera system in a safe, well
ventilated location.
•
Depending on ambient conditions, the camera
and monitor may not always correctly display
individuals or objects.
•
Be sure the equipment is always located in a safe
environment. Do not expose the device to me-
chanical stress, extreme temperatures, moisture
or vibrations!
•
Do not operate the backup camera system if the
equipment or cables exhibit damage or malfunc-
tions!
•
All repairs to the backup camera system must be
performed by a qualified electrician / qualified
specialist.
•
the backup camera system may not be modified
(altered).
•
Do not operate the backup camera system after it
has been dropped or otherwise damaged. Take to
a qualified electrician for inspection or repair!
•
Do not use other cables or accessories. Do not
extend the cables.
•
Be sure there is ample clearance around the
monitor and transmitter to ensure adequate air
circulation during use. Do not cover the monitor
or transmitter with objects!
•
Do not use the cable to carry or pull on the cam-
era or transmitter.
•
Powering the backup camera system requires an
input voltage of 12 V / DC. Always disconnect the
monitor from the power source by unplugging
the 12 V plug when not in use. Never pull on the
connector cable to disconnect!
•
Never allow liquids to enter the monitor! Never
immerse the monitor in liquids! Only operate the
monitor dry.
•
The camera is protected against rain but not
waterproof! Do not immerse camera in water or
other liquids!
•
Be sure all plugs and power cables are dry. Never
power on the equipment with moist or wet hands!